Jelenleg nem áll rendelkezésre a leírás magyar nyelven. Elolvashatja a leírást angolul.
The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.
X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
Provides the spatial impact and realism of a live sound field
Battery operation allows use with most recording devices
Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns
Ideal for general stereo recording and field sound capture
Excellent channel separation
Included fuzzy windscreen offers excellent wind protection
Elements: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: X/Y Stereo
Frequency Response: 20–20,000 Hz
Low Frequency Roll-Off: 150 Hz, 6 dB/octave
Open Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 Pa
Channel Balance: <2.5 dB
Impedance: 200 ohms
Maximum Input Sound Level: 122 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical): 103 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio: 75 dB, 1 kHz at 1 Pa
Battery Type: 1.5V AA/UM3
WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
Battery Current / Life: 1.2 mA / 500 hours typical (alkaline)
Switch: Off, on/flat, on/roll-off
Weight: 270 g (9.5 oz)
Dimensions: 192.0 mm (7.56") long,
65.0 mm (2.56") maximum head diameter,
21.0 mm (0.83") body diameter
Output Connector: Integral 3-pin XLRM-type
Cable: 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch
X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
Provides the spatial impact and realism of a live sound field
Battery operation allows use with most recording devices
Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns
Ideal for general stereo recording and field sound capture
Excellent channel separation
Included fuzzy windscreen offers excellent wind protection
Elements: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: X/Y Stereo
Frequency Response: 20–20,000 Hz
Low Frequency Roll-Off: 150 Hz, 6 dB/octave
Open Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 Pa
Channel Balance: <2.5 dB
Impedance: 200 ohms
Maximum Input Sound Level: 122 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical): 103 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio: 75 dB, 1 kHz at 1 Pa
Battery Type: 1.5V AA/UM3
WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
Battery Current / Life: 1.2 mA / 500 hours typical (alkaline)
Switch: Off, on/flat, on/roll-off
Weight: 270 g (9.5 oz)
Dimensions: 192.0 mm (7.56") long,
65.0 mm (2.56") maximum head diameter,
21.0 mm (0.83") body diameter
Output Connector: Integral 3-pin XLRM-type
Cable: 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch
Paraméterek
- Mikrofon típus: Kondenzátoros
- Irányjellemző: Kardioid
- Frekvenciatartomány: 20 Hz - 20 kHz
- Csomag tartalma: Mikrofon, kábel XLR(F)-Jack TRS 3,5 mm, mikrofon kengyel, elemek, szélvédő, puhatok
- Darabszám: 1
- Tömeg: 0,27 kg
- Impedancia: 200 Ohm
- Ki számára alkalmas: Univerzális
Küldje el nekünk kérdését és zenei szakértőink hamarosan válaszolnak rá. Amennyiben kérdése mások számára is hasznosnak bizonyul, megosztjuk többi vásárlónkkal is.
Ne feledjen tartozékokat is vásárolni
-
BESPECO MS36NE
Mikrofon állvány
12 900 Ft
-
BESPECO TT450FM
Mikrofon kábel
8 900 Ft